CHIP-mediated hyperubiquitylation of tau promotes its self-assembly into the insoluble tau filaments

The tau protein is a highly soluble and natively unfolded protein. Under pathological conditions, tau undergoes multiple post-translational modifications (PTMs) and conformational changes to form insoluble filaments, which are the proteinaceous signatures of tauopathies. To dissect the crosstalk among tau PTMs during the aggregation process, we phosphorylated and ubiquitylated recombinant tau in vitro using GSK3β and CHIP, respectively. The resulting phospho–ub-tau contained conventional polyubiquitin chains with lysine 48 linkages, sufficient for proteasomal degradation, whereas unphosphorylated ub-tau species retained only one–three ubiquitin moieties. Mass-spectrometric analysis of in vitro reconstituted phospho–ub-tau revealed seven additional ubiquitylation sites, some of which are known to stabilize tau protofilament stacking in the human brain with tauopathy. When the ubiquitylation reaction was prolonged, phospho–ub-tau transformed into insoluble hyperubiquitylated tau species featuring fibrillar morphology and in vitro seeding activity. We developed a small-molecule inhibitor of CHIP through biophysical screening; this effectively suppressed tau ubiquitylation in vitro and delayed its aggregation in cultured cells including primary cultured neurons. Our biochemical findings point to a “multiple-hit model,” where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process, thus indicating that targeting tau ubiquitylation may be an effective strategy to alleviate the course of tauopathies.

Multiple-hit model for tau aggregation, where sequential events of tau phosphorylation and hyperubiquitylation function as a key driver of the fibrillization process.     

Chemiluminescence from the oxidation of urea and ammonia with hypobromite and N-bromosuccinimide

The spectral distribution for the chemiluminescent oxidation of ammonia with hypobromite is significantly different to that for the oxidation of ammonia with N-bromosuccinimide. Therefore, in contrast to the assumptions of several authors, the action of N-bromosuccinimide is not solely derived from the in situ formation of hypobromite. Neither the oxidation of urea with hypobromite nor the oxidation of urea with N-bromosuccinimide involves an initial hydrolysis of urea to ammonia in the alkaline solution. However, these two reactions lead to a common emitter. The addition of xanthene dyes, such as dichlorofluorescein, enhance the chemiluminescence intensity by energy transfer to the efficient fluorophore, but reaction between the sensitiser and hypobromite can result in a significant increase in the background signal. A list of potential interferences has been compiled; particular attention was paid to guanidino compounds, as the chemiluminescence accompanying the oxidation of this functional group has not been previously discussed.     

Voltammetric studies of microcrystalline C60 adhered to a carbon electrode surface and placed in contact with aqueous electrolyte containing potassium ions

The reduction of microcrystalline C₆₀ fullerene, adhered at a carbon electrode and immersed in aqueous electrolyte, has been studied under various voltammetric conditions. This work reports mainly the voltammetric studies carried out principally in electrolyte containing potassium ions. Comparison of adherence techniques, such as solvent casting and mechanical transfer methods, are made to assess if the type of adhered techniques has any significant influence on the observed electrochemistry. The solvent casting method is found to produce three peaks in the potential for C₆₀^0/n- redox couple as compared to a single and large peak produced when a mechanical transfer technique is employed. When the reduction potential of microcrystalline C₆₀ in the presence of K⁺ is compared with other cations, such as Li, Na, Rb and Cs, it is observed that the shift of reduction potential follows the change in the hydration energy in the order Cs>Rb>K>Na>Li. In a mixed electrolyte study of CsCl/KCl, the reduction potential and peak shape of C₆₀^0/n- redox couple during cyclic voltammetry is observed to change with concentration of the cations and the observed electrochemistry can be attributed to a cation-exchange mechanism. The reduction of C₆₀ is irreversible in aqueous electrolyte containing alkaline cations as the re-oxidation process does not produce any observed electro-activity. Evidence of the formation of a passive coating of K _n C₆₀ fulleride, which does not appear to undergo dissolution is obtained under cyclic voltametric conditions. This coating remains electrochemically active in the presence of tetrabutylammonium ions in acetonitrile. Scan rate, chronocoulometric, and scanning electron microscopic studies provide evidence of the presence of a surface process involving solid–solid transformation.     

Hamaker constants in integrated circuit metalization

A new method for determining Hamaker constants was examined for materials of interest in integrated circuit manufacture. An ultra-high vacuum atomic force microscope and an atomic force microscope operated in a nitrogen environment were used to measure the interaction forces between metals, dielectrics, and barriers used during the metalization portion of integrated circuit manufacturing. The materials studied included copper, silver, titanium nitride, silicon dioxide, poly(tetrafluoroethylene), and parylene-N. Spheres coated with a material of interest were mounted on AFM cantilevers and brought into contact with substrates of interest. The interaction force was measured as the cantilever approached the substrate but before the two surfaces came into contact, and also when the particle was pulled out of contact with the substrate. The Hamaker constant calculation from the contact measurement is based on an adhesion model that quantifies the contribution of geometrical, morphological and mechanical properties of materials to the measured adhesion force. Hamaker constants determined with this new approach were compared with values found by using the Derjaguin approximation for a sphere to describe the interaction force as the cantilever approaches the surface. Both approaches produced similar values for most of the systems studied, with variations of less than 10%.     

Determination of volatile components in peptic powder by gas chromatography-mass spectrometry and chemometric resolution

Gas chromatography-mass spectrometry (GC-MS) coupled with chemometric resolution upon two-dimensional data was proposed as a method for the analysis of volatile components in a traditional Chinese medicinal preparation peptic powder which contains Rhizoma Atractylodis, Pericarpium Citri Reticulatae, Cortex Magnoliae Officinalis and Radix Glycyrrhizae. Ninety-three components were separated and 65 of them were qualitatively and quantitatively analyzed which represented about 90.28% of the total content. With the help of chemometric resolution, the data were resolved into a pure chromatogram and a mass spectrum of each chemical component. The accuracy of qualitative and quantitative results was greatly improved by using the two-dimensional comprehensive information of chromatograms and mass spectra. The example showed that chemometric resolution could greatly enhance separation ability. This makes it possible to analyze complicated practical systems like traditional Chinese medicinal preparations with the help of coupled instruments and chemometric resolution methods.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

Ab initio and variational transition state approach to beta-C3N4 formation: kinetics for the reaction of CH3NH2 with H

The CH3NH2 molecule has been considered as either an important intermediate in methane and ammonia mixtures or a precursor in methylamine and hydrogen mixtures in the synthesis of carbon nitride thin films. The fast Hydrogen (H) abstraction from CH3NH2 is an important process involved in the formation of HCN or CNH in the chemical vapor deposition (CVD) of carbon nitride thin films. The energetic and kinetic characteristics of the H abstraction reaction from CH3NH2 by atomic H used in CVD of beta-C3N4 were studied using ab initio direct dynamics methods for the first time. Two primary processes were identified for this reaction: H abstraction from the CH3 group and H abstraction from the NH2 group. On the basis of ab initio data, the rate constants of each channel have been deduced by canonical variational transition state theory with small-curvature tunneling correction over a wide temperature range of 200 to approximately 3000 K. The theoretical results were compared with available experimental data.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

高效石墨浮选剂的合成

高效石墨浮选剂的合成金婵，薛玉，汪进，刘欣荣，秦英海（哈尔滨工业大学应用化学系哈尔滨１５０００１）（大庆石化总公司大庆）关键词石墨，浮选剂，合成，混合烃由于石墨具有良好的力学性能、导电、高熔点等性质，广泛用于原子能、宇航和民用工业。隐晶质石墨属于微晶...     

Fluorescence-based nitric oxide detection by ruthenium porphyrin fluorophore complexes

The ruthenium(II) porphyrin fluorophore complexes [Ru(TPP)(CO)(Ds-R)] (TPP = tetraphenylporphinato dianion; Ds = dansyl; R = imidazole (im), 1, or thiomorpholine (tm), 2) were synthesized and investigated for their ability to detect nitric oxide (NO) based on fluorescence. The X-ray crystal structures of 1 and 2 were determined. The Ds-im or Ds-tm ligand coordinates to an axial site of the ruthenium(II) center through a nitrogen or sulfur atom, respectively. Both exhibit quenched fluorescence when excited at 368 or 345 nm. Displacement of the metal-coordinated fluorophore by NO restores fluorescence within minutes. These observations demonstrate fluorescence-based NO detection using ruthenium porphyrin fluorophore conjugates.